Friday, December 16, 2011

Thick and Easy 1 hour potholder, Version 1 {crochet pattern}

Pin It

Everyone has seen these potholders, I'm sure that some of you have received them as gifts even.  The mystery is in how they're made.  They're one piece double thickness potholders, and they are super easy!  I've rarely come across patterns for them, as I think they are one of those kind of "word of mouth" patterns...The kind that you learned from so and so, who learned it from her mom, who learned it from her grandma, so on and so forth, you get the idea.

Well, I've been playing with this pattern for some of my holiday gifting and am here to share it with you!

Thick and Easy 1 Hour Potholder, Version 1

Materials:


Size H hook   
Cotton yarn-  THIS IS VERY IMPORTANT.  Cotton is able to withstand very high heat and will not melt.  It will catch fire if exposed to flame, but it will not melt.  Acrylic yarn will melt when coming into contact with very hot items from the oven and is not to be trusted as an actual useable potholder material.  Acrylic yarn is fine when used for trivets, provided that your dish has cooled slightly prior to being used for it.  I personally used Lily: Peaches and Cream Yarn.  I really like the Peaches and Cream yarn and Sugar and Cream for kitchen items because it gives a thick and durable feel.

Pattern:

{pattern notes}  this pattern is mostly a free form spiraling round pattern.  Do not get hung up on where you are on a row, you can figure out if you are right by laying it as it will go together as shown in the pictures.  You may end your potholder before or after i do, depending on the yarn that you use and the tension of which you crochet.  The important thing is that it meets together as shown in the pictures.
You will not join rounds, instead moving on to sc in the top of the last round directly.

ch 30

Row 1- work 1sc in the 2nd chain, from hook in the back chain only! (see picture)  sc to the end, turn.


Row 2- work 2 sc in what is now the back of the chain, on the opposite side of the last sc of the last row.  work 1 sc in each back chain to the end.(see picture) Add one more sc to last chain.  Do not turn.
*note, piece will begin to curl on ends, and this means you're doing it right.


Round 2- *now rounds will be worked, Row 1 and Row 2 equal the first round. *  sc in back loop of each sc around.


R3-15- sc in back loop of each sc around.

Now while following this pattern, it is advised that once you get to Round 13 or so, you begin laying your piece as it folds naturally.  This way you can see how much of the gap that you need to fill.  Reference the pictures below to see how much difference even just one round can make.  Feel free to add or omit rows as you need to in order to get the seams to line up properly.




Another note!  Once you understand this pattern, you can make these in any size!  Follow the same formula, but increase your starting chain!  By making it bigger, you can make yourself a bigger potholder!

You can also flip it inside out, and make a different look:

6 comments:

  1. do you leave your seam open? Would these be heavy enough to use as a glove type holder? Putting your fingers in one side and thumb in the other? Hmmmm, got me thinking now!

    ReplyDelete
    Replies
    1. I didn't leave the seam open on these, though I see where you're going with that. You might want to double strand if you try to make a glove type holder out of it, or make two, (one slightly smaller) and insert it inside the other, if it weren't thick enough. Or... you could just make a square and attach it inside the flat square part to make the part you would use for grabbing thicker.... It would take some experimentation, but I'm pretty sure you could get the "glove type" effect from it. Let me know if you do!

      Delete
  2. Thank you. I read someone else's pattern and I got the concept... But they insisted that there was no turning ...... Your pictures helped me a lot. My sister in law got this type of pot holder for a wedding present and they got burned (left on the stove, acrylic yarn.. icky melt spot...) and I wanted to suprise her with some more : ) Thanks Very Much for helping to make that happen!!!

    ReplyDelete
    Replies
    1. There isn't turning, in the traditional sense, where you actually turn the piece, it's more of going around in a circle, making a tube in a way. I'm glad this pattern helped you figure it out!!

      Delete
  3. I'd like to thank you for taking the time to work this pattern out and for sharing it! I received two of these potholders many years ago, when I graduated from culinary school. I found these holders to be part of my "kit", along with my kitchen knives, when I started my first job. Needless to say, the potholders went "missing" within a few weeks of starting that job...and I never found another holder I loved as well as those originals. When I saw your pattern on Ravelry, I was making them within five minutes, and I made at least a dozen of them. I shared four of them, and kept the rest for my stash. I'm now teaching cooking to novices, and I'll be giving a set of these holders as a graduation gift!Thank you once again. I know it sounds sappy, but you've really touched a lot of lives with sharing this pattern!

    ReplyDelete
    Replies
    1. You are so very welcome! I also have 4 other versions of this pattern using different stitches. This is my favorite out of the bunch though, I think.

      Delete

Related Posts Plugin for WordPress, Blogger...